Silverlit's Nano Falcon currently holds the world record for being the smallest RC (well, it's really an IR control) helicopter; officially certified by the Guinness Book of Records. When I opened the box and removed the tiddler, I hoped my previous disappointing experience with a similarly small RC (IR) helicopter(Mini X SH-6025-1) would not be repeated.
For background context, my experience with the Mini X involved a few hours of flying before the battery progressively lost its ability to hold a charge. Apart from seemingly poor quality batteries, the Mini X tended not to hold a yaw trim for more than 10-15 seconds. This was in large room with plenty of space for the rotor wash to dissipate. In short, I was not very impressed with this model.
Back to the Silverlit product. The build quality is reasonable with clean seams/joints between the fuselage halves. The colour trim is sprayed on relatively cleanly; with the densely packed interior visible through window. A Li-Po battery occupies the right cabin while the electronics occupies the left cabin.
I love the little control box unit. Compared to the Mini X, Silverlit's unit is a work of art. Inside the control unit, the circuit board, wiring and soldering is clean and professional. Like other Nano Falcon owners, I too removed the throttle spring. It is simply too strong and really prevents you from easily keeping the throttle at a desired setting.
From the first flight out of the box, I experienced the dreaded toilet bowl effect (TBE). Lubricating the dog bone links, rotor head pins and shafts failed to stop the TBE. Removing one of the two dog bone links to the flybar also made no difference. So I must have got a bum model for the money I paid.
As an experiment, I added a small blob of Blu Tack to the tail rotor housing to stop the forward flight. But the hover was only stable for about 10 seconds before the TBE started. Also, small reductions in throttle while hovering resulted in what looked like a vortex ring state (rotary wing equivalent of a fixed wing stall) and ended in a crash. I was able to repeat this consistently.
Did the TBE somehow cause the suspected vortex ring state (VRS) behaviour? I don't think so as I was able to consistently enter the VRS even before the TBE emerged. So I think the VRS and TBE behaviours are separate issues. But hey, I'll leave the definitive conclusion to rotary wing aero engineers as I'm only a fixed wing aero engineer.
To exit a VRS before they lose control, single rotor helicopter pilots fly forward into clear air. Tandem rotors like a Chinook require lateral flight into clear air. A co-axial 3-channel model can only fly forward or backward to find clear air. So I'm now guessing that was the underlying reason for Silverlit building a slightly forward CG into the model!
Forward stick flight was obviously faster than back stick flight due to the forward CG. Yaw was slowish but not unexpected. Liftoff was reasonably fast for such a tiny model but again probably not unexpected.
In summary, the model is indeed small and cute with reasonable build quality. But disappointingly, it seems to fall short in the flight quality department due to the TBE and VRS behaviours. I don't know if the behaviours I observed were unique to my particular model. But I'm not going to spend another $30+ to find out!

